If it is happening early in the cast, the lure is moving too fast, and you need more tension on your spool control knob. If it is happening in the middle of the cast while the bait is traveling forward and upward, you might have to adjust the magnetic or centrifugal braking. If backlash is occurring late or just before the bait touches down, you are probably neglecting to thumb the spool in time. Keep your thumb on the spool and slowly release line, bringing it forward until it stops and you have reached the tangle.
Look at the spool and find the source of the tangle, but resist the urge to start picking at it with your fingernails or teeth. Apply heavy pressure with your thumb on the source of the tangle. Reel in a half to full turn against the pressure of your thumb. By doing this, you are moving the spool while keeping the tangle in one place, loosening it up. After doing this once, try releasing line. You may be able to clear the tangle completely, but you may only get a foot or two before the tangle reoccurs.
Repeat the process until you reach the next tangle, and keep repeating until you free the tangles and all remaining backlash. With braided line, I have found that a gentle pinch at the tangle will sometimes help free things up, but I resist dragging giant loops of line out of the spool. Many times, tangles and looping will straighten up when the spool is immobilized and the line is pulled forward. This is as important a fishing skill as tying a knot or making a cast and should be practiced and mastered so that you are confident at all times when you are out there on the water.
Very helpful. Got my first casting reel and will put your advice into practice in my backyard tomorrow. Thank you. Been using baitcasters for years and this is by far the most in depth tutorial on baitcasters.
Really well done. Will recommend this article. The easiest, quickest and most effective use of your fishing time is to use your hard erned cash and buy a good spinning reel.
The reason why baitcasters tend to be preferred by many bass anglers is because of the greater casting accuracy they provide. Bass are often found close to heavy cover, and the lure must be placed close to that cover with pinpoint accuracy in order to catch them. In that case, you need to be able to stop the lure before it hits the shore itself, which is easier to achieve with a casting reel.
In addition to this, a spinning setup is also much better when using finesse tactics, as it works very well with lightweight tackle. As mentioned above, one of the key advantages of a baitcasting reel vs spinning reel is its ability to cast longer distances. In this respect, baitcasters clearly outperform spinning reels, which is why many anglers prefer a casting vs spinning reel for surf fishing.
To summarize the pros and cons of a spinning reel vs casting reel : spinners are generally cheaper, easier to use, and more versatile. This makes them an excellent choice for beginners, and as general purpose reels for experienced anglers. Baitcasters, on the other hand, have much better casting qualities than spinners, but tend to be more expensive and more difficult to master. Because of this, they are best suited for experienced anglers who want to use them for specific applications.
What is the difference between a spinning reel and a baitcaster? What is a baitcaster? In general, baitcasters are better for heavier lures and bigger fish, while spinning reels can handle any type of tackle, but excel with lighter lures.
You will need to practice much longer with a baitcaster, but in the end, that practice will be well worth it and will make you a more versatile angler.
While both reels can get the job done in most situations, there are specific scenarios in which you may prefer to use one over the other. A spinning reel sits on the bottom of the rod and the spool side-loads the line at a degree angle, with the line fed through guides on the bottom of the rod.
In contrast, on a baitcaster, the reel sits on top with the line coming straight out of the spool and through guides on the top side of the rod. Spinning reels are as user-friendly as it gets, and this factor alone has led to their position as the most popular reels among anglers.
You flip open the bail to release the line, pinch the line down with your finger, and let go as you cast forward. A spinning reel is by no means only for beginnings, though, as professional anglers primarily use spinning reels and will win tournaments with them. However, these professional anglers also likely have many different baitcasters rigged up as well. The choice between a baitcaster and a spinning reel can often come down to personal preference, but there are situations in which one works better than the other.
While you would ideally have both a spinning rod and a baitcaster, a spinning rod is going to be the way to go if you just want one rod that can do everything. I like to compare the difference between a baitcaster and a spinning reel to the difference between a manual transmission and an automatic transmission in a car.
Manual, however, takes some practice and is more of an art form that is being perfected over time. Is manual better than automatic? The answer to that question likely comes down to whether you have had the time and experience with a manual transmission. Some people may prefer having a bit more control over their car, or in this case, their rod while others may prefer ease and comfort. This analogy is an easy way to get started on the differences between a baitcaster and a spinning reel, but the analogy can only go so far.
In , Shimano introduced the digital control braking system for baitcasters. On the Shimano DC reels, a micro-computer inside the reel that monitors spool speed 1, times every second and applies just enough braking to prevent backlash while maximizing distance. Setting 1 is for more experienced anglers or ideal conditions, allowing maximum casting distance.
Each setting applies a bit more braking, up to setting 4, which is recommended for anglers just learning to bait-cast, or in backlash-prone conditions like casting into a heavy wind or skipping a bait under a dock or overhang.
In order to have the best results, active and passive braking will need to work together. The first thing to consider when choosing a baitcaster is your budget. However, the most critical factor to consider when obtaining a baitcaster is the style of fishing you plan to do with the reel.
Will you be fan-casting crankbaits and spinnerbaits over long distances, or will you be pitching and flipping jigs into heavy cover? This factor will help you determine the gear ratio of the reel. Higher gear ratios mean faster retrieve rates. One guideline for deciding on gear ratio is determining whether the reel or the rod is most important to the presentation. With lures that are cast and retrieved at a steady pace, such as spinnerbaits and crankbaits, reels with a lower gear ratio are often preferred.
With lures that rely on the rod to impart action, like jigs or worms, a high-speed reel is best because it picks up line faster to retrieve the lure and make another cast to a likely area. There are hundreds of low-profile baitcasting reels on the market, each with their own features and benefits. Here are some great reels with entry-level prices but tournament-level performance.
Once you determine your budget and style of fishing, go to your favorite bait and tackle store and ask to see some reels.
0コメント